Call us: (386) 253-8833

Aileron Gap Seal (Square Wing)

Aileron Gap Seal unfinished

Aileron Gap Seal (Square Wing)

$450.00

This is a mod you can’t afford to do without- the fuel savings alone will surely pay for the installation itself in no time!

Gain up to 3MPH – A wing should be a smooth lifting surface, with no leakage between the high-pressure bottom side and the low-pressure upper side.
However…a Piper’s wing is neither smooth nor free from leaks! Sealing these gaps will gain you approximately five to six M.P.H. in cruise speed and fifty feet per minute in rate of climb. You get an added bonus of lower stall speed and much greater aileron effectiveness.

This Month's Discounts

  • $25.00 off gap seals, nose gear fairing & flap hinge fairings.
  • Buy any 3 items and get 10% off! (Not valid with any other discount.)

Categories: , , , , Tag:
  • Aircraft: All PA 28, 32
  • Gains: Up To 3 MPH
  • Installation Time: Typical Installation In 3 HRS
  • Durable Aluminum Construction
This is a mod you can't afford to do without- the fuel savings alone will surely pay for the installation itself in no time! A wing should be a smooth lifting surface, with no leakage between the high-pressure bottom side and the low-pressure upper side. However...a Piper's wing is neither smooth nor free from leaks! Sealing these gaps will gain you approximately five to six M.P.H. in cruise speed and fifty feet per minute in rate of climb. You get an added bonus of lower stall speed and much greater aileron effectiveness. Note: Some of the earliest PA28 aircraft (1961-1965) have outward facing flutes/ribs in the aileron skin instead of the later standard version of inward facing flutes/ribs. If your aircraft has outward flutes the standard Aileron Gap Seals will not fit, but we can build a modified gap seal that has cut-outs where the flutes would make contact. This is an additional $100 charge.

Additional Information

Weight 5 lbs

Related products